Zapamiętaj mnie


Odpowiedz 
 
Ocena wątku:
  • 0 Głosów - 0 Średnio
  • 1
  • 2
  • 3
  • 4
  • 5
2 Main Points Of Installment Of Glass Railing
Autor Wiadomość
ahwhglass
Junior Member
**


Status: Offline
Liczba postów: 6
Dołączył: 21.05.2018
Post: #1
2 Main Points Of Installment Of Glass Railing
A glass railings are glass-facing resources, with metal, wood and other material structure of your guardrail. Glass railings having beautiful appearance, strong wind resistance and various advantages, is a good decorative performance of modern-day guardrail products, suitable intended for residential quarters, villas, shopping malls, swimming pools and also other places.

Next, the little braid will explain to you the two main facets of the glass railing being noticed during installation: wholesale Laminated Glass

First, the main points in the installation: Glass guardrail must be tempered glass or cheap folder, toughened glass thickness can't be less than 12mm, glasses can't be directly contact together with rigid joints, the two needs to be elastic material liner. Should the design uses both sides belonging to the embedded glass guardrail, glass on the column groove on both sides must have more than 3mm clearance, clearance with glass sealant filling, glass embedded groove depth is no less than 12mm. Glass Railings

2nd, the base column set up points: When the guardrail to glass instead of column, the glass should be left out from the gap between 8mm or so, glass and other materials really should be left at the intersection with the gap between 8mm, Distance application sealant filling. The base from the glass guardrail is an integral part of the set guardrail, which is usually instructed to be assembled into fixed glass through angle steel, with the expansion prop on both sides with the fixing piece and the floor or considering the welding and the pre-programmed connection fixed firmly.

Glass and fixed parts trough bottom that has a hardness of 80-90 plastic support block pad, glass in to the fixed part of the depth of a lot more than 100mm, glass into the fixed component of the two sides (that is, with angle steel, steel plate) should be left outside the 3-6mm Gap, with neoprene dish liner, and clamping glass. Between the steel plate and glass really need to leave a gap involving around 6mm, glass and other materials at the intersection belonging to the site also to get away from the gap of about 6mm, clearance with magnifying glaas sealant fill. Glass Railings.
26.10.2018 8:40
Znajdź wszystkie posty użytkownika Odpowiedz cytując ten post
Odpowiedz 


Skocz do:


Użytkownicy przeglądający ten wątek: 1 gości

Kontakt | Autoxen.pl | Wróć do góry | Wróć do forów | Wersja bez grafiki | RSS